Each drop of our Aircraft Grade solution has thousands of hardened aluminum cubes in a non-toxic food grade antifreeze carrying agent. These building blocks provide a temporary bridge between the tool and stressed fastener heads for easy screw removal and bolt removal. It has no silicones to hinder sealing/painting operations on metal surfaces. So no problem with worn screw removal and bolt removal operations while performing aircraft maintenance. Use EZ Grip Friction Drops. This product has met ASTM Tests for aircraft us as listed on our home page.
Stripped Screws
Apply a drop to the screw head or driver head and wiggle the tool against the screw head while applying moderate pressure to allow the liquid carrier to move the blocks into a bridging position between the tool and any differential surfaces of the damage screw head. Then apply forward and slightly cocked hard pressure against the screw head and turn the screw out. There is no need to clean EZ Grip from the tool or fastener after use as it will not cause corrosion and does not contain petroleum or silicone.
Rounded Bolts/Nuts
Apply a few drops to the inside of a box end wrench or socket and place over the bolt and wiggle the tool into place allowing the blocks to form a bridge between the wrench/socket and bolt or nut corners. Cock the wrench or socket against the bolt/screw while applying pressure and turn. There is no need to clean EZ Grip from the tool or fastener after use as it will not cause corrosion and does not contain petroleum or silicone.
Worn gripping and turning tools:
Apply to head or jaws of driver wrench or pliers to increase gripping power. There is no need to clean EZ Grip from the tool or fastener after use as it will not cause corrosion and does not contain petroleum or silicone.
Extending tool life:
Keep a residue of EZ Grip Friction Drops on driver head wrench/socket shoulders and plier jaws to keep these surfaces from coming in
Item# : SPM15177021519
Model # : EZ59183
