SMARTSTANDARD 6ft Heavy Duty Sliding Barn Door Hardware Kit, Black, (Whole Set Includes 1x Pull Handle Set

Q: How to ensure the stability and safety of the door? 2 * Door Stoppers: Two door stoppers slide along the rail and tighten down at any point to stop your door exactly where you want, and they’re cushioned by rubber caps for a quiet close. 1 * Floor Guide: A T-shaped floor guide is supplied (with anchors) to prevent the door from swinging out or up against the baseboard. 2 * Anti-jumpers- those little round discs- go on top of the door and won't allow door to be lifted off rail unless they're turned. Q: When do you need a headboard? a. If the studs don't line up with the pre-drilled holes in the rail. b. If there is a doorway trim. And "door depth'' plus "trim depth'' is greater than 2'' Q: How much space do I need above the doorway? A: You will need a minimum of 8" from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Q: How thick of a door will this kit work with? A: There are solutions for any thickness of door! The bolts included for attaching the hangers to the door support a thickness range of 1 3/8" to 1 3/4", but this can be easily navigated by countersinking the bolt head into the back side of the door, or by picking up 4 longer bolts from your local hardware store. The other thing affected by a thicker door is the spacing needed between the door and wall (or baseboard/doorway trim). Plug in your door depth and trim depth below: 2''- door depth - trim depth If your answer is 0 or greater, then you're fine. If your answer was negative, then that number is the extra spacing you need. This extra spacing is accomplished by bolting a header board to the studs, and then the rail to this header board. 5FT Big Wheel 6FT Big Wheel 6.6FT Big Wheel 8FT Big Wheel 10FT Big Wheel 12FT Big Wheel Brand SMARTSTANDARD SMARTSTANDARD SMARTSTANDARD SMARTSTANDARD SMARTSTANDARD SMARTSTANDARD Track Length: 5 foot 6 foot 6.6 foot 8 foot 10 foot 1

View full description